Lic. No. 2005112-DCA

Steps & Ladders

Steps & Ladders

Model #6000

Inpool Ladder

  • Deluxe heavy-duty in-pool ladder
  • Totally adjustable for deck heights from 46″ to 56″
  • 5″ x 18″ wide
  • Flat treads for easier climbing
  • Includes deck platform
  • Warm grey side rails with grey treads for high visibility in water.
  • No sand required.
  • Features an anti-entrapment barrier
  • Optional #6000-EXT Extension Kit available to extend ladder to approximately 68 inches

Model #635-52

Economy Inpool Ladder

  • Straight Up and Down Inpool
  • Does not require barrier
  • Adjusts to fit deck heights 46″ to 56″
  • For decks higher than 56″ use # EB100
  • 18″ Width; 22″ High handrails
  • Available in warm grey, complementing today’s brown or grey pools
  • Now comes with a deck
  • Weight guideline: 250 lbs
  • One year full warranty

Model #7200

Roll-Guard A-Frame Safety Ladder

  • Aesthetically pleasing contemporary design in beautiful warm gray color
  • Large 5 inch x 18 inch wide Comfortreads
  • Curved side rails designed with strength in mind
  • Inner side rails include integrated side barriers to prevent entry behind the ladder
  • Easy assembly with minimal hardware
  • Adjusts to fit pools 48” to 56” tall

Curve Inpool Step System

For inground and above ground

  • Available in four configurations; two for aboveground and two for inground
  • Start with the base step unit (staircase) and then expand into a complete Curve system at any time
  • Curve system has the sweeping “wedding cake” look that many homeowners want in a pool step
  • Four tread unit is for above ground pools
  • Three tread unit is for inground pools
  • Above ground unit can be assembled with treads curving inwards or outwards depending on customer preferences
  • Eye-catching, graceful sloping handrails
  • Two tone color – grey treads with warm grey (beige) sidewalls and handrails. Complements any swimming pool!
  • Adjustable base pads to compensate for a slightly-dished pool floor
  • Can be shipped by UPS or Fed-Ex
  • Weight limit – 400 lbs.
  • Tread width – 27”
  • Tread depth – 10”
  • Riser height – 11”
  • Unit depth – 32”
  • Handrail height (from top step) – 30”
  • Height to top tread – In ground 36” – Above ground 47”
  • Mounting bracket length – 24”
  • Overall outside width – 38”
  • Complete Curve System width – 58”

Model #7100X

Evolution A-frame Ladder

  • Economical, yet full-featured
  • Fits 48” to 54” pools
  • Snap-lock treads for quick, easy assembly
  • Swing-up outer section inhibits unauthorized access to pool
  • Outer treads can be padlocked (lock included)
  • 16” tread width
  • No sand or bricks required; just fill with water
  • Available in warm grey, complementing today’s brown or grey pools
  • Convertible to Inpool ladder with otional CK-7100W conversion kit
  • Features an anti-entrapment barrier
  • Weight guideline: 300 lbs.
  • Ladder must be attached to pool frame -not for use on soft-sided/inflatable pools.
  • Now featuring 2-piece handrail design that allows for reduced package size while cutting back on shipping costs

Model #7000X

Eliminator A-frame Ladder

  • One SKU fits 48″ to 54″ above ground pools: Adjustability is made by simply moving side braces up or down depending on pool height.
  • Heavy duty construction: Unique one piece handrail/leg design will hold 300lbs.
  • Five evenly spaced steps make climbing the ladder easier: Most other adjustable ladders increase the space between the bottom step and the next step when installed in a 53″ or 54″ pool.
  • Outer steps swing up and lock into upright position: Some building inspectors now require this instead of a lift-off ladder section.
  • No sand required; just fill with water to prevent floating. Most other ladders use a bag filled with sand.
  • Converts to an inpool ladder with optional CK100 Kit: Just cut ladder to desired length.
  • Two tone color: grey steps with a warm grey body: Complements today’s pools

Model #Step-1

Confer In Pool Step

  • For above ground pools with flat bottoms.
  • Easy, snap together installation
  • Can be shipped via UPS/RPS
  • Large, flat steps (each with 270 square inches) complete with two all-plastic handrails
  • Mounting brackets included; secures unit to pool or deck
  • Gray steps for high visibility in water
  • Economical, yet strong; holds 400 pounds.
  • Improved base system

Confer Step Specs

  • Fits Decks up to 60″
  • Height to Top Step – 47 inches
  • Height to Handrail – 38 inches
  • Projection into Pool – 32 inches
  • Width – 31 inches
  • Riser Height – 11 inches
  • Step Dimensions – 10″ x 27″

us nec ullamcorper mattis, pulvinar dapibus leo.

PES

Pool Entry System

Can be installed in two configurations:

  • Model #PES-1: One unit to be used inside the pool off a deck.
  • Model #PES-DBL: Two units can be combined, making a complete entry system inside and outside the pool. Comes complete with our #PES-G Gate System.
  • Model #PES-G: Gate System for two combined Pool Entry Systems.

The unique design of the pool entry system allow two units to be joined together to form a complete entry/exit system into the pool. Designed for all people including elderly swimmers and physically challenged swimmers:

  • Five steps, instead of four.
  • Top step covers the pool top rail.
  • Meets current and proposed ANSI/NSPI Standards.
  • Easy assembly; steps and risers snap into side panels and are held in place with plastic wedges. No metal parts.
  • Non-slip step surfaces are grey for high visibility.
  • Adjusts to fit 48″ to 54″ tall pools and decks.
  • Excellent for elderly, slightly handicapped, or heavy swimmers. Holds over 400 pounds.
  • Does not rest on or attach to pool.
  • All plastic construction will not affect water chemistry and will not corrode.
  • Gate for #PES-DBL restricts access to the pool. It is self-closing and self-latching. Satisfies most building inspectors.
  • Includes deck connector for easy attachment to deck.
  • Fits decks up to 54″ or can fit taller decks using special mounting instructions.

SPECIFICATIONS OF POOL ENTRY SYSTEM:

  • Overall Projection into pool – 36″
  • Overall height – 81″ (plus up to 6″ adjustability)
  • Overall width – 31″
  • Step – 10″ x 27″
  • Top Platform – 12″ x 27″
  • Handrail height (from top step) – 32″
  • Riser height – 11″

SPECIFICATIONS OF GATE:

  • Height of Gate – 58″
  • Width of Gate – 27″
  • Height of Latch – 57″
  • Gate Is Self-Closing & Self-Latching.
  • Includes Padlock.
Model #8000 Ground-to-Step Entry Ladder
  • When combined with #Step-1 it forms an economical Entry/Exit System for 48” to 54” pools
  • Outside treads swing up into an upright position for security
  • 18” wide: 22”high handrail, 9-1/2” span
  • Weight guideline: 300 lbs.
  • Comes with padlock
     

Model G7200

Roll-Guard Gate

  • Attaches easily to our 7200 Roll-Guard ladder to provide added security
  • Self-closing and self-latching
  • Satisfies most building inspector requirements
  • Latch is located well out of the reach of small children
  • Latch is 73″ above grade
  • Manufactured to meet current BOCA Codes and requirements
  • Contoured design “hugs” ladder steps and restricts access
  • Model 7200 ladder not included
  • Padlock included

Model #8100

Ground-to-Step Entry Ladder

  • When combined with our Curve step it forms an economical entry/exit system
  • Outside treads swing up into an upright position for security. Padlock included
  • Note: Curve inpool step unit not included; must be purchased separately
  • Simple and easy assembly.
  • Weight guideline: 300 lbs.

Model #S.I.G.

“Safe and Secure” System

  • Satisfies most building inspector and insurance requirements in most states
  • Self-closing, self-latching gate restricts access to pool
  • Gate includes self-closing mechanism (see inset photo) for a sure close everytime
  • Gate includes padlock for complete security
  • Inpool ladder takes up minimal space inside pool
  • Steps and ladder can be separated and used individually if a deck is built

Enclosure Kit

Kit made for STEP-1 product

  • Allows you to connect and enclose two Confer Steps for an economical entry system.
  • Fits 48″ to 54″ pools.
  • Consists of top platform, two side rails, pickets, and gate. The gate completely encloses the steps for security, and is self-enclosing and self-latching.
  • Due to insurance requirements and specific building codes in municipalities across the US, we must sell a complete enclosure kit. We CANNOT sell the top step and side rails separately.
X

DesignStudio Bug Report

Hello! please let us know if you found a bug so we can fix this ASAP